キーエンス測定機

KEYENCE measuring instruments used at TDC

This page explains the KEYENCE measuring instruments used at TDC.

KEYENCE measuring instruments used at TDC

TDC has the following KEYENCE measuring instruments.

Model nameDetails
GT2-H12KLHigh precision contact digital sensor
VHX-6000 digital microscope
LM-1000 image dimension measuring instrument

For other measuring instruments handled by TDC, please check the “Measuring Equipment” page.

High-precision contact digital sensor GT2 series “Sensor head high-precision/low measuring force type GT2-H12KL”

KEYENCE(キーエンス)の測定器「高精度接触式デジタルセンサGT2シリーズ「センサヘッド 高精度/低測定力タイプ GT2-H12KL」」
ModelGT2-H12KL
Detection methodScale shot system Absolute (no value skipping)
Range of measurement12 mm
Resolution0.1 µm
Indication accuracy1 µm (P-P) *1
Measuring forceFacing downward : 0.4 N *2
Facing horizontal :0.3 N *2
Facing upward:0.2 N *2
Sampling period1 ms
Mechanical responsiveness4 Hz ※3
Operation indicatorBi-color LED (red, green)
Environmental resistanceDegree of protection:-
Ambient operating temperature: -10 to +55°C (non-freezing)
Ambient operating humidity: 35 to 85% RH (non-condensing)
Vibration resistance: 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, Z directions
Shock resistance: 1,000 m/s2 (IEC60068-2-27)
Material4Body: Zinc die-cast body case, indicator light polyarylate (PAR)
Dust boots:-
Contact: SUS304, tungsten carbide *4
Head CableSold separately (connected to M8 connector)
WeightAbout 95 g (does not include cable)

Reference: Sensor Head High Accuracy/Low Measuring Force Type – GT2-H12KL | KEYENCE (Japanese)

Digital Microscope VHX-6000 Series “Digital Microscope VHX-6000”

*Currently out of production

KEYENCE(キーエンス)の測定器「高精度 画像寸法測定器LM シリーズ「コントローラ LM-1000」」
ModelVHX-6000
CameraImaging device: 1/1.8 type CMOS image sensor Effective pixels 1600 (H) x 1200 (V)
Scanning method: Progressive
Frame rate: 50F/s (max.)
High dynamic range: 16-bit gradation for each pixel of RGB
Gain: Auto, Manual, Preset
Electronic shutter: Auto, Manual, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000
Supercharged shutter: 0.02 s to 4 s
White Balance: Push Set, Auto, Manual, Preset (2700K, 3200K, 5600K, 9000K)
Back focus adjustment: Not required
LCD monitorSize: Color LCD (IPS type) 23 inch *1
Screen size: 509.184 (H) x 286.416 (V) mm *1
Pixel pitch: 0.2652 (H) x 0.2652 mm (V) 1 Number of pixels: 1920(H)×1080(V)(FHD)1
Display colors: Approximately 16.77 million colors 21
Brightness: 300 cd/m2 (Center 1 Point, typ.) 1 Contrast ratio: 1000:1 (typ.)1
Viewing angle: ±89° (typ. left/right), ±89° (typ. top/bottom) *1
Optical Recording Unit/Hard Disk Drive UnitUnit: DVD-ROM Super Multi Drive Unit
Disc used: CD-R/CD-RW/DVD±R/DVD±R DL/DVD±RW/DVD-RAM
Recording capacity: 8.7GB (when using DVD±R DL)
Hard disk drive unit: 500 GB (including 165 GB reserved area) Approximately 1,680,000 images (2 million pixel image compression) to 55,000 images (2 million pixel image uncompressed)
Image formatWhen compressed: JPEG When uncompressed: TIFF
Supported image size20000 (H) x 20000 pixels (V) (when connected)
Light sourceLamp: High brightness LED
Lamp life: 40000 hours (reference value)
Color temperature: 5700K (yp.)
Video outputOutput method: DVI-I 1920 x 1080 pixels
Scanning frequency: dedicated LCD monitor/external monitor Horizontal (H): 66 kHz Vertical (V): 60 Hz
InputMouse input: USB mouse compatible
Keyboard Input: Supports USB keyboard
External remote input: static/shooting no-voltage input (with/non-contact)
InterfaceLAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
USB2.0 series A: 6 lines
USB3.0 series A: 2 systems
Power supplyPower supply voltage: AC100-240V 50/60Hz
Power consumption: 280VA
Environmental resistanceAmbient operating temperature: +5 to +40°C
Ambient operating humidity: 35 to 80% RH (non-condensing)
WeightController part: about 12.5kg
Camera unit: about 1.2 kg (VHX-6100/6020)
Console: about 0.5 kg
Dimensions (excluding protrusions)Width 550 x Height 470 x Depth 200 mm (when stored)

Reference: Digital Microscope – VHX-6000 | Keyence (Japanese)

High-precision image dimension measuring instrument LM series “Controller LM-1000”

KEYENCE(キーエンス)の測定器「高精度 画像寸法測定器LM シリーズ「コントローラ LM-1000」」
ModelLM-1000
TypeControler
Image sensorType 1 20 million pixels monochrome CMOS
Display10.4-inch LCD monitor (XGA: 1024 × 768)
Light receiving lensDouble telecentric lens
Image measurementWide field of view measurement mode 225 mm × 125 mm
High precision measurement mode 206 mm × 106 mm
Minimum display unit: 0.1 µm
Repeatability:
In-field (2σ) wide-field measurement mode ±0.5 µm
Within the field of view (2σ) High accuracy measurement mode ±0.1 µm
X/Y axis ±0.9 µm with stage movement
±0.9 µm in XY plane with stage movement
Measurement accuracy:
In-field (2σ) wide-field measurement mode ±2 µm *1
Within the field of view (2σ) high-precision measurement mode ±0.7 µm *2
X/Y axis with stage movement (EUX, MPE, EUY, MPE) ±(1.8 + 0.02 L) µm *3
XY plane with stage movement (EUXY, MPE) ±(2.8 + 0.02 L) µm *3
Height measurementRepeatability: ±2 µm
Measurement accuracy (EUZ, MPE): ±(4.8 + 0.04 L) µm *4
External remote inputNon-voltage input (reed/non-contact)
External outputOK/NG/FAIL/MEAS.: PhotoMOS output, rated load DC 24 V, 0.5 A, ON resistance 50 mΩ or less
InterfaceLAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
USB 3.1: 2 lines (2 on the rear)
USB 2.0 Series A: 4 lines (2 front, 2 rear)
Monitor output: DVI-D
RecordHDD:500 GB
Lighting systemTransmission: Telecentric transmitted illumination
Epi-illumination: 4-split multi-angle lighting (motorized), slit ring (directional) side lighting (motorized), telecentric coaxial lighting
External lighting controlLight intensity control: PWM control 100 kHz
Output voltage: DC 12V
Output current: 1.6 A (maximum)
XY stageMovement range: 200 mm × 100 mm (electric)
Load capacity: 7kg
Z stageTravel range: 75 mm (motorized)
Power supplyPower supply voltage: 100 to 240 VAC ±10% (50/60 Hz)
Power consumption: 430 VA or less
Environmental resistanceAmbient operating temperature: +10 to 35°C*5
Ambient operating humidity: 20 to 80% RH (no condensation)
Overvoltage category: II
Pollution degree: 2
Weightabout 8 kg

Reference: Controller – LM-1000 | KEYENCE (Japanese)

About Keyence

KEYENCE is a manufacturer of various sensors and measuring instruments established in 1974. It develops and sells image processing equipment, control and measurement equipment, analysis equipment for research and development, and business information equipment.

In 1990, it was listed on the First Section of the Tokyo Stock Exchange, and in the fiscal year ended March 31, 2018, it is a large company with sales of 526.8 billion yen and 6,602 employees.

Related page